Pool Table Removal · Edmond
Anthony's Reliable Junk Removal disassembles and removes pool tables from Edmond homes, including slate beds upstairs or in finished basements. Call or text 405-566-9730 for a free quote.
The Job
Edmond's newer subdivisions near Oak Tree and around Kelly Avenue were built with upstairs bonus rooms meant for exactly this kind of thing — a pool table, a TV, maybe a wet bar. That's great while the table is in use, but it means a lot of Edmond pool table removals start with a full staircase carry, often with a turn at the landing that a slate bed simply cannot navigate in one piece.
We also see plenty of tables in the finished basements that showed up in Edmond's earlier housing stock, along with the occasional table in a detached garage or shop building on a larger lot out toward Arcadia Lake. Each setup calls for a different plan, but the common thread in Edmond is tight turns — stairwells, landings, and narrow hallway doorways that were sized for furniture, not a 300-pound slate panel.
Families reach out to us for pool table removal in Edmond for a mix of reasons: downsizing after kids move out and head to UCO or elsewhere, prepping a house to sell, or simply replacing an old table with something smaller. Whatever the reason, we break the table down fully before it ever gets near the stairs.
The thing that separates an easy pool table job from a hard one in Edmond almost always comes down to the staircase. A straight single flight is manageable even with a bulky load, but the L-shaped staircases common in Edmond's two-story floor plans add a landing turn that a fully assembled table frame, let alone a slate panel, simply won't clear. We measure that turn before we commit to a plan rather than finding out halfway down the stairs.
We also run into pool tables that were assembled inside the room they're in — brought up as parts and put together on-site because the finished table never would have fit through the door or around the stair landing in one piece. When that's the case, it's a strong sign that reversal requires the same full disassembly, not a shortcut.
If you're clearing out a bonus room before a move or listing your Edmond home, getting the table out early avoids it being a sticking point during showings. Contact us for a free quote. Call or text 405-566-9730.
How It Works
Call or text 405-566-9730 with a few photos of the table and the path out, especially if stairs or a landing turn are involved. Edmond's two-story bonus room setups are common enough that we plan for them by default, but seeing the actual space ahead of time lets us bring the right crew size.
Felt comes off first, followed by the rails and pockets, which protects the fabric and exposes the bolts holding the slate to the frame. This step happens the same way whether the table is upstairs, downstairs, or out in a shop building, and it's what makes everything after it manageable.
Each slate section gets carried on its own rather than as part of an assembled unit, since a landing turn on an Edmond staircase isn't forgiving if a heavy panel shifts mid-carry. We use enough people per panel to keep full control through every turn and doorway.
The wood frame, legs, and rails come apart and load last, and we do a final sweep for felt scraps or leftover bolts before we leave. If you're staging the room for a showing, we'll make sure it's left tidy and ready to photograph.
Why Anthony's
Two-story homes with bonus-room pool tables are the norm in a lot of Edmond neighborhoods, and we've built our process specifically around the landing turns and stair widths that come with that layout. We don't improvise on a staircase carry — we plan it before the first bolt comes out.
We never try to muscle an assembled table through a doorway or down a flight of stairs. Felt, rails, pockets, slate, and frame all come apart first, which protects both the table and your home's walls, trim, and flooring along the way.
Whether the table is in a finished basement or an upstairs bonus room, our crew treats your home the same way — padding corners, protecting rails, and sweeping up after the job is done so you're not left with a mess once the table is gone.
Questions
It's one of the most common setups we see in Edmond, so no, it's not a problem, but it does mean full disassembly is required. We break the table all the way down to individual slate panels, rails, and frame pieces, then carry each piece down the stairs separately with enough crew to control a landing turn if your staircase has one.
Yes, this is one of the first things we ask about. A straight staircase and an L-shaped one with a landing require different approaches, and knowing which one we're dealing with ahead of time lets us bring the right crew size and plan the carry correctly instead of discovering the challenge mid-job.
Yes, and this actually tells us something useful — if the table had to be built in place because it couldn't fit through the door assembled, that's a strong signal the removal needs the same full disassembly in reverse. We treat those jobs with extra care around doorway widths and corner turns.
Almost always, yes. A standard three-piece slate bed can weigh several hundred pounds total, with individual panels often over 100 pounds each. We carry each slate piece separately rather than trying to move the bed as one unit, which keeps the weight manageable and protects the slate from cracking. Our team at Anthony's Reliable Junk Removal understands the specific needs of the Edmond community, and we strive to provide a seamless experience for every pool table removal job we undertake. We handle all the heavy lifting and disposal so you can focus on your transition without any added stress or physical labor.
That's a conversation worth having before we schedule anything. If the table is in good shape, selling or donating it locally might make more sense than disposal, and we're glad to hold off on scheduling the removal while you explore that route, especially for higher-end tables in good condition.
Ground-floor rooms with a clear path often get scheduled quickly, sometimes the same day you call. Bonus room and basement jobs with stairs or landing turns may need a day or two of lead time so we can bring the right crew size. Call or text 405-566-9730 and we'll be straight with you about timing.
Related Pages
Where We Work
Same-day service available across OKC. Free quotes. No obligation. Call or text us now.